Konfigurasi WVDIAL Smartfren dengan Modem CDMA Gee Mobile EvDO di POCI linux

ok langsung saja... colok modem d port USB kita... disini lah keanehan modem ini, saat yang tepat untuk mencolokkan modem ini adalah saat loading bios/ saat booting... agar nanti dapat dikenali sebagai CDROM.

saat Dekstop sudah loading dan ada notifikasi CDROM, klik tombol eject

1. masuk root lalu ketikkan perintah d console lsusb

[root@localhost ainuxs]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 05c8:0100 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 05c6:6500 Qualcomm, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[root@localhost ainuxs]#

2. lalu ketikkan perintah lagi dmesg

usb 5-1: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset full speed USB device using uhci_hcd and address 2
sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
sr: Sense Key : Hardware Error [current]
sr: Add. Sense: No additional sense information
sr 4:0:0:0: [sr1] unaligned transfer
sr 4:0:0:0: [sr1] unaligned transfer
usbcore: registered new interface driver snd-usb-audio
usb 5-1: USB disconnect, address 2
usb 5-1: new full speed USB device using uhci_hcd and address 3
usb 5-1: New USB device found, idVendor=05c6, idProduct=6500
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: CDMA3G 1X-EVDO modem
usb 5-1: Manufacturer: CDMA3G 1X-EVDO
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbserial_generic 5-1:1.0: generic converter detected
usb 5-1: generic converter now attached to ttyUSB0
usbserial_generic 5-1:1.1: generic converter detected
usb 5-1: generic converter now attached to ttyUSB1
usbserial_generic 5-1:1.2: generic converter detected
usb 5-1: generic converter now attached to ttyUSB2
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
PPP generic driver version 2.4.2
padlock: VIA PadLock Hash Engine not detected.
PPP MPPE Compression module registered
PPP BSD Compression module registered
PPP Deflate Compression module registered
[root@localhost ainuxs]#

3. ketikkan lagi perintah modprobe
[root@localhost ainuxs]# modprobe usbserial idVendor=05c6 idProduct=6500

ENTER

4. buat file dengan nama 05c6:1000 pada directori /etc/usb_modeswtich.d/
isi dari file tersebut adalah :


################################################## ######

# Gee mobile EVDO

DefaultVendor = 0x05c6

DefaultProduct = 0×1000

TargetVendor = 0x05c6

TargetProduct = 0×6500



CheckSuccess = 20

MessageContent = “5553424370f93a82000000000000061b010000000000000000000000000000″



5. buat file pada directory etc/ dengan nama wvdial.conf
isi untuk koneksi smartfren :


[Dialer Defaults]
Modem=/dev/ttyUSB0
Baud=230400
Init1=at+csq?
#Init2=at$SYSTIME
Init3=ate0
#Init4=at$ruimsts?
ModemType=USB Modem
Phone=#777
Username=smart
Password=smart
DialCommand=ATDT
Stupid Mode=1


kembali ke console lg dan ketikkan wvdial


selamat mencoba....

source